Signal Snowboards

YUSAKU OMNI

SOLD OUT!

This hybrid can take you from the park to the powder.
It combines camber between your feet with Rocker on the tip and tail. This years Omni graphic is taken straight from the factory floor. Our graphics department is full of silkscreen inks and this is a photo of our mixing table. Ride the Wavelength!

All things to all mountain riders! Rocker and camber blended together create Wavelength technology

Camber between your feet

Five degree Rocker from your feet out to the tip and tail

Rocker keeps your nose up in powder while the camber provides edge control while you carve.

The transition point provides an additional contact point that engages even before the effective edge

Less surface area on the snow equals a faster board!

Directional and a twin board. It’s directional in the sense that the nose is longer than the tail. Twin in the sense that the tip and tail widths are identical

Radial sidecut meets at the center of the board

Poplar core with “Standard Profile”

Biaxial glass on the bottom of the core and triaxial glass on the top

Durasurf sintered base material

Iso-Sub 4160 tops

Carbon torsion bars

Price: $280.00

YUSAKU OMNI: 150 only, team riders specialty top sheet
Yusakus graphic pays tribute to Japan, its hope for its people and the future - and his cat.

This board is a special version of the rest of its series. Each team colorway board comes in the size that team member rides on the hill. The geometry is the same as the corresponding size in the series. Just the graphic is theirs.

Signal cores are lightweight.
They are milled in our own factory with Poplar wood and  built by alternating grain structure and combined with high quality resin. These cores are strong and retain their pop.

Every board that Signal builds is
hand made in our southern California factory. We’re very proud of this.
Your support increases our strength in promoting US manufacturing, US jobs and quality craftsmanship.

Signal’s Wavelength made its debut in 2008. This hybrid came from the simple concept of taking our favorite camber board and adding slight rocker to the tip and tail. For those who love camber and are interested in Rocker, but are not willing to give up the control at speed.